China 75kw 100HP Energy Saving 40% Industrial Low Noise Single Oil Injected Construction Screw Air Compressor with Ghh/Rotorcomp/Hanbell Air End Compressors supplier

Item Description

Product: DM-100A
Cost-free air shipping and delivery: 7-12.8 m3/min
Functioning pressure: 8 bar
Manufacturer of screw air conclude: Hanbell ZheJiang AB collection
Handle: PLC
Pushed: direct driven
Cooling: by air
Electric motor:  Permanent Magnet Variable kind,100hp 75KW 380V/50hz/3ph, IP65 protection level,Insulation class F
Discharge temperature: significantly less than ambient +8 ºC
Noise: much less than 72 dB(A)
Air outlet dimensions: G2″
Dimension: 2000*1120*1590mm
Excess weight: 1070kg
Warranty: 24 months for the screw air end,twelve months for the complete set compressor other than air filter,oil filter and oil/air separator.

01 Characteristics Of long term Magnet Variable Frequency Air Compressor

It is a unique new design and style, which combines the long lasting magnet motor and the velocity management frequency converter. It couples with the high good quality air finish, which shows the sophisticated screw compressor engineering.

one.Extremely-reduced temperature increase style, which permits the compressor managing at ultra-minimal frequency for a long time.

two.Shut-loop vector control technique for faster control and much more specific speed management.

three.The compressor device can nonetheless work successfully when the frequency is lowered by far more than 50%.

four.The pressure is steady and the strain fluctuation is correctly managed within .1 bar.

5.The determine shows a comparison of several commencing strategies. It can be observed that the frequency converter is slowly and gradually accelerated to start off, the commencing is far more stable, and the current CZPT is fully averted.

02 Air Conclude

A lot more steady, no mechanical transmission failure: high-performance everlasting magnet synchronous motor and screw male rotor undertake embedded-built-in shaft immediate relationship framework, no gear transmission, totally eliminate gear pitting or damaged teeth Two unbiased long term magnet motors are integrated immediately drive 2 air ends, no coupling failures.

Much more vitality successful, the air stop is always operating at vitality-conserving velocity.

More productive and successful everlasting magnet motor + no transmission performance loss.

Much more relaxed, reduced running sound, eliminating 3 resources of sound: no-click on bearing sound, no equipment meshing noise, no coupling generate sounds.

More compact: The long term magnet motor is small in size and the integrated structure saves place.

Below the set frequency conversion stress, the unit will routinely modify to preserve the output pressure within ± .1 bar, decreasing pointless waste (the power consumption raises by 7% for each and every 1 bar of pressure boost)

.3 Positive aspects of Long lasting Magnet Motors In contrast to Basic Asynchronous Motors

Substantial effectiveness: Gets rid of excitation program losses and increases efficiency.

It is even now successful below lower load problems: the energy effectiveness of a everlasting magnet motor is a lot more than 9% higher than that of a conventional asynchronous motor at complete load procedure, and its energy effectiveness continues to be unchanged as the pace decreases.

Massive overdrive torque: The ratio of the optimum commencing torque of the long term magnet synchronous motor to the rated torque can be a lot more than 3 times, although the general asynchronous motor is only 1.6 times.

The manage is a lot more steady: the corresponding time of the permanent magnet motor is <50ms, and the gas production can be adjusted in a large range in an instant, so that the gas pressure is truly stable.

Technological Parameters

Model No.

Power 

(kw/hp)

Stress

Capacity   

(m3/min)

Cooling 

Approach

Starting 

Technique

Noise

Air

Outlet

Dimension (mm) Excess weight
DM-10A seven.5/ten 8 bar one.2 Oil cooling Frequency sixty three G3/4″ 895*590*970 190
DM-20A 15/twenty 7bar two.4 65 G3/4″ 1062*690*a thousand 236
8 bar two.three
10 bar 2.two
DM-30A 22/30 7bar 3.7 68 G1″ 1330*830*1265 410
8 bar three.6
10 bar three.2
DM-40A 30/forty 7bar 5.one 68 G1″ 1330*830*1265 520
8 bar five.
10 bar /
DM-50A 37/fifty 8 bar 6.five 69 G1 1/2″ 1500*940*1415 655
10 bar five.6
13 bar four.five
DM-60A 45/sixty 7 bar 8.1 70 G1 1/2″ 1500*940*1415 730
8 bar 7.five
13bar five.nine
DM-75A 55/75 7 bar 10.three 70 G2″ 1600*1060*1470 950
8 bar nine.5
13 bar seven.8
DM-100A 75/100 7 bar 13 Air cooling 72 G2″ 2000*1120*1590 1070
8 bar 12.eight
10 bar 11
13 bar 9.five
DM-125A 90/125 7 bar sixteen.33 72 G2″ 2000*1120*1590 1221
8 bar 13.65
10 bar fourteen
13 bar twelve.5
DM-150A 110/a hundred and fifty 7 bar twenty.eight 72 DN65 2400*1630*1980 1950
8 bar 19.6
10 bar 17.8
13 bar 15.five
DM-175A 132/one hundred seventy five 7 bar 24.1 72 DN65 2400*1630*1980 2150
8 bar 23.two
10 bar 19.five
13 bar seventeen
DM-220A 160/220 7 bar 28.5 72 DN80 2600*1700*1980 3620
8 bar 27.5
10 bar 23
13 bar twenty
DM-250A 185/250 7 bar 33.2 72 DN80 2600*1700*1980 3920
8 bar 31.two
10 bar 27.5
13 bar 25.eight

Notes:
one.A represents air-cooling type
2.Doing work Setting temperature: 2ºC~45ºC
three.Startup Mode: frenquency start 
4.Work Electrical power: 380V / 50HZ/3P 4 wire sort.
five.F.A.D quantity stream examination is according to ASMC PTC9 or ISO1217 normal (GB/T3853)

Certificate

Project circumstance

Buyer suggestions

Packaging and Shipping and delivery

• Packing Details: Plywood crate pallet plus foam board and bubble movie, Entire shut wooden circumstance. 1pcs/every single package deal (for stationary screw air compressor)

• Shipping and delivery approach: by sea, by LCL/FCL or as asked for

• Shipping method: FOB, CFR, CIF and EXW etc.

• Shipping and delivery time: in 7-fifteen days after receiving deposit (customized devices not provided)

Company Profile

Dehaha Compressor was established in 1996 with more than 150 experienced workers and far more than twenty five R&D engineers’ teams.We concentrate on the research & develop, manufacture and energy-saving remedies of screw air compressor to create price for clients and society.

Dehaha opened to the world considering that 2015, and now we have a foreign trade section with far more than dozens individuals, serving customers all around the world 24 hours. We have income associates who can speak English, Spanish, Portuguese, French,and Russian which tends to make it less difficult for our customers from all in excess of the world to interact and negotiate with us.now our valued customers are above 130 nations around the world. Germany Common and thirteen years exporting experience aid us won a lot more than 50 faithful overseas agents.

Dehaha continuously innovates merchandise improvement and administration to meet up with customers’ need. The potent enterprise society and continuous innovation make CZPT improved speedily to attain the business basic principle “Energy Saving Initial, Mutual Price Shared”. The production line of CZPT is consist of screw air compressor from 5.5KW to 550KW, oil totally free air compressor, portable air compressor, permanent magnet variable frequency air compressor, large pressure air compressor and compressed air purification tools, and so forth.

Dehaha mission is to be a globe-renowned high-end manufacturer, with sustainable development, constantly strengthening its very own value and sharing it with our consumers and personnel. Dedicated to provide our consumers a silent and vitality-conserving created products.

Our service

1.24/7 right after product sales service support in diverse languages.
2.Comply with up the feedback of goods in 2 months interval by electronic mail or phone.
three.Assistance of installation and commissioning on web site can be offered by factory-skilled technicians or nearby Licensed Support Middle.
four.Technical instruction for customers in DEHAHA air compressor manufacturing facility or operating web site.
five.Plenty of first spare components with confirmed high quality are all available from our central shares in ZheJiang and all distributors’depots. 
six.All sorts of technical files in various languages.

Soon after-sale Provider

• Any concerns or requests just before, during or soon after income, we would like to help you any time and will find you the greatest solution in 24 hrs.

• Warranty: One year for the entire machine Authentic spare parts will be presented with the ideal cost.

• An overboard engineer service is available.
 

Special Personalized Support

1) Entire OEM

• Quantity: at the very least 5 pcs

• In this plan, we will do all the alterations (Color, nameplate, and logo) as your require, and will not demand added fee.

2) Fifty percent OEM

• Quantity: no limit

• Under this system, we can make the required alteration (nameplate and symbol) but we will cost some added payment for the nameplate, as the nameplate factory has the MOQ.

three) Emblem OEM

• Quantity: no limit

• Only the logo will be modified to yours, and no extra charge will be billed.
 

Abroad Engineer Provider

• We are accessible to send out our engineer for aboard service. Only require you to arrange lodging, transportation, and translator. The added price for every will be reviewed based mostly on the local cost level.

FAQ

1.Why customer select us?
DEHAHA COMPRESSOR ZheJiang CO.,LTD.with 24 many years old history,we are specialized in Rotary Screw Air Compressor.Germany Regular and thirteen many years exporting knowledge assist us won far more than thirty loyal overseas brokers.We warmly welcome your small demo order for high quality or market take a look at.

2.Are you a manufacturer or trading organization?
We are specialist maker with big contemporary factory in HangZhou,China,with specialist design and style staff.The two OEM & ODM services can be accepted.

3.In which is your factory located? How can I go to there?
Our manufacturing facility is situated in HangZhou Town, ZheJiang Province, China. We can choose up you from ZheJiang , it really is about 1 hour from ZheJiang Xihu (West Lake) Dis. Airport to our factory.Warmly welcome to go to us!

4.What’s your supply time?
380V 50HZ we can supply the items within fourteen times. Other electrical power or other colour we will shipping inside 22 days,if urgently buy,pls make contact with our sales in advance.

five.How lengthy is your air compressor warranty?
One particular year for the total equipment and 2 many years for screw air conclude, except consumable spare components and we can give some spare components of the machines.

6.How does your manufacturing facility do relating to quality handle?
Top quality is every little thing. we always connect fantastic importance to quality managing from the extremely starting to the really conclude. Our manufacturing facility has acquired ISO9001:2015 authentication and CE certificate.

7.How prolonged could your air compressor be utilized?
Normally, far more than 10 years.

8. What is actually payment time period?
T/T,L/C,D/P,Western Union,Paypal,Credit Card,and and many others.Also we could acknowledge USD, RMB, Euro and other currency.

9.How about your customer services?
24 hours on-line support accessible.48 hrs dilemma solved guarantee.

10.How about your following-revenue services?
(1) Give clients with installation and commissioning on the web recommendations.
(2) Effectively-skilled engineers offered to overseas services.
(3) Worldwide agents and after provider offered.

US $2,000-15,000
/ Set
|
1 Set

(Min. Order)

###

Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Structure Type: Closed Type
Installation Type: Stationary Type

###

Customization:

###

Model No.

Power 

(kw/hp)

Pressure

Capacity   

(m3/min)

Cooling 

Method

Starting 

System

Noise

Air

Outlet

Dimension (mm) Weight
DM-10A 7.5/10 8 bar 1.2 Oil cooling Frequency 63 G3/4" 895*590*970 190
DM-20A 15/20 7bar 2.4 65 G3/4" 1062*690*1000 236
8 bar 2.3
10 bar 2.2
DM-30A 22/30 7bar 3.7 68 G1" 1330*830*1265 410
8 bar 3.6
10 bar 3.2
DM-40A 30/40 7bar 5.1 68 G1" 1330*830*1265 520
8 bar 5.0
10 bar /
DM-50A 37/50 8 bar 6.5 69 G1 1/2" 1500*940*1415 655
10 bar 5.6
13 bar 4.5
DM-60A 45/60 7 bar 8.1 70 G1 1/2" 1500*940*1415 730
8 bar 7.5
13bar 5.9
DM-75A 55/75 7 bar 10.3 70 G2" 1600*1060*1470 950
8 bar 9.5
13 bar 7.8
DM-100A 75/100 7 bar 13 Air cooling 72 G2" 2000*1120*1590 1070
8 bar 12.8
10 bar 11
13 bar 9.5
DM-125A 90/125 7 bar 16.33 72 G2" 2000*1120*1590 1221
8 bar 13.65
10 bar 14
13 bar 12.5
DM-150A 110/150 7 bar 20.8 72 DN65 2400*1630*1980 1950
8 bar 19.6
10 bar 17.8
13 bar 15.5
DM-175A 132/175 7 bar 24.1 72 DN65 2400*1630*1980 2150
8 bar 23.2
10 bar 19.5
13 bar 17
DM-220A 160/220 7 bar 28.5 72 DN80 2600*1700*1980 3620
8 bar 27.5
10 bar 23
13 bar 20
DM-250A 185/250 7 bar 33.2 72 DN80 2600*1700*1980 3920
8 bar 31.2
10 bar 27.5
13 bar 25.8

Notes:
1.A represents air-cooling type;
2.Working Environment temperature: 2ºC~45ºC;
3.Startup Mode: frenquency start 
4.Work Power: 380V / 50HZ/3P 4 wire type.
5.F.A.D volume flow test is according to ASMC PTC9 or ISO1217 standard (GB/T3853)

US $2,000-15,000
/ Set
|
1 Set

(Min. Order)

###

Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Structure Type: Closed Type
Installation Type: Stationary Type

###

Customization:

###

Model No.

Power 

(kw/hp)

Pressure

Capacity   

(m3/min)

Cooling 

Method

Starting 

System

Noise

Air

Outlet

Dimension (mm) Weight
DM-10A 7.5/10 8 bar 1.2 Oil cooling Frequency 63 G3/4" 895*590*970 190
DM-20A 15/20 7bar 2.4 65 G3/4" 1062*690*1000 236
8 bar 2.3
10 bar 2.2
DM-30A 22/30 7bar 3.7 68 G1" 1330*830*1265 410
8 bar 3.6
10 bar 3.2
DM-40A 30/40 7bar 5.1 68 G1" 1330*830*1265 520
8 bar 5.0
10 bar /
DM-50A 37/50 8 bar 6.5 69 G1 1/2" 1500*940*1415 655
10 bar 5.6
13 bar 4.5
DM-60A 45/60 7 bar 8.1 70 G1 1/2" 1500*940*1415 730
8 bar 7.5
13bar 5.9
DM-75A 55/75 7 bar 10.3 70 G2" 1600*1060*1470 950
8 bar 9.5
13 bar 7.8
DM-100A 75/100 7 bar 13 Air cooling 72 G2" 2000*1120*1590 1070
8 bar 12.8
10 bar 11
13 bar 9.5
DM-125A 90/125 7 bar 16.33 72 G2" 2000*1120*1590 1221
8 bar 13.65
10 bar 14
13 bar 12.5
DM-150A 110/150 7 bar 20.8 72 DN65 2400*1630*1980 1950
8 bar 19.6
10 bar 17.8
13 bar 15.5
DM-175A 132/175 7 bar 24.1 72 DN65 2400*1630*1980 2150
8 bar 23.2
10 bar 19.5
13 bar 17
DM-220A 160/220 7 bar 28.5 72 DN80 2600*1700*1980 3620
8 bar 27.5
10 bar 23
13 bar 20
DM-250A 185/250 7 bar 33.2 72 DN80 2600*1700*1980 3920
8 bar 31.2
10 bar 27.5
13 bar 25.8

Notes:
1.A represents air-cooling type;
2.Working Environment temperature: 2ºC~45ºC;
3.Startup Mode: frenquency start 
4.Work Power: 380V / 50HZ/3P 4 wire type.
5.F.A.D volume flow test is according to ASMC PTC9 or ISO1217 standard (GB/T3853)

Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
air-compressor

Oil-free

Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.

Single-stage

A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
air-compressor

CFM

The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.

PSI

The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
air-compressor

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China 75kw 100HP Energy Saving 40% Industrial Low Noise Single Oil Injected Construction Screw Air Compressor with Ghh/Rotorcomp/Hanbell Air End Compressors     supplier China 75kw 100HP Energy Saving 40% Industrial Low Noise Single Oil Injected Construction Screw Air Compressor with Ghh/Rotorcomp/Hanbell Air End Compressors     supplier
editor by czh 2023-01-03

Recent Posts