China Custom Unparalleled Efficiency Low Pressure Oil-Free Air-Cooled Oxygen Compressor manufacturer

Product Description

Detailed Photos

Unparalleled Efficiency Low Pressure Oil-Free Air-Cooled Oxygen Compressor


Product Descriptions:
The Oxygen Compressor manufactured by ASC Compressor Factory are oil-free lubrication reciprocating piston compressors developed in collaboration with the German company CHINAMFG DEMAG. These models are known for their low energy consumption, minimal noise, reduced vibration, high reliability, and easy operation.

Each unit primarily consists of the compressor mainframe, electric motor, common base frame, air system, cooling system, lubrication system, instrument control system, drainage system, and electrical system. All components are generally installed on a single common base frame, which is then mounted on a concrete foundation, making it a fixed-type gas station. The connections between the equipment and the fixing points to the base are detachable, making transportation, installation, operation, and maintenance extremely convenient.

As a specialty gas compressor, this model can also compress gases like helium, natural gas, LPG, associated petroleum gas, hydrogen, argon, ethylene, propylene, propane, chloromethane, chloroethane, ethylene oxide, perfluoroethane, carbon monoxide, ammonia, dimethyl ether, carbon dioxide, and coal gas. It’s widely used in industries like petroleum, chemical, fertilizer, metallurgy, industrial gases, fuel gas, food, and more.

Our products, incorporating technology from Germany’s CHINAMFG Demag companies, exhibit high reliability. Wearable parts like gas valves and piston rings use products from Austria’s Hoerbiger company, with a lifespan exceeding 8000 hours. The system supports soft starting, allowing frequent start and stop cycles for the compressor.  It features a wide intake range for broad adaptability. The overall skid-mounted structure results in low noise and is easy to install in urban areas, leading to investment savings.
It is equipped with a CHINAMFG PLC control system for high automation, ABB soft start (or variable frequency), and features automatic shutdown with audible and visual alarms in case of faults

Product Parameters

Model Flow m3/h Inlet Pressure
Outlet Pressure
VW-6/16-24 360 1.6 2.4 2600 110
VW-6/(0-1.62)-(5-21) 360 0-0.162 0.5-2.1 2350 75
WW-26.7/0.5-10 1602 0.05 1 4500 250
DW-2/0.2-16 120 0.02 1.6 1500 22
WW-3/8 180 normal pressure 0.8 1500 22
2VW-50/3.5 3000 normal pressure 0.35 6000 220
2VW-16.7/0.5-20 1002 0.05 2 6500 185
ZW-0.6/6-10 36 0.6 1 760 5.5
ZW-0.8/12 48 normal pressure 1.2 1200 7.5
DW-9.5/7 570 normal pressure 0.7 2600 55
VW-4.5/0.5-10 270 0.05 1 2100 37
2VW-25/25 1500 normal pressure 2.5 2100 250
2VW-50/3.5 3000 normal pressure 0.35 6000 220
DW-4.5/0.5-13 270 0.05 1.3 2500 18.5
ZW-0.46/(5-10)-(15-20) 27.6 0.5-1.0 1.5-2.0 850 11
VW-5.6/(1.5-2)-25 27.6 0.15-0.2 2.5 2000 55
V-6.5/(1-3)-7 390 0.1-0.3 0.7 1900 37
WW-2.5/3-250 150 0.3 25 3500 110

Our Factory


Part of Customer Visit


Certifications & Testing


Related Product



Q:Are you a factory?

A:Yes, we are indeed a factory. We specialize in manufacturing high-quality Air/Gas Compressors and are proud to be a primary source for these products.

Q:How long is your delivery time?
A:It varies depending on the specific situation. For our standard configuration compressors, the delivery time is around 30 days. For customized compressors, it usually takes about 30-45 days.

Q:What technical support do you offer?
A:We offer comprehensive technical support to our clients, including remote assistance for installation and commissioning processes. Additionally, we have a team of seasoned engineers ready to be deployed to international client locations for meticulous on-site debugging, installation, and post-installation services.

Q:What is your warranty period?
A:Our warranty policy is valid for a period of 18 months from the date of commissioning at the end customer’s site or 21 months from the date of receipt by the purchaser, whichever comes first. This comprehensive coverage is designed to ensure total customer satisfaction and the reliability of our products

Q:How do you package the compressors?
A:For smaller compressors, we utilize robust plywood boxes that conform to export specifications.
    For the larger units, we strategically place them in freight containers, implementing secure fastening methods to safeguard            against any potential damage during the shipping process.

Q:What are your payment terms?
A:Usually, the payment is made by T/T with a 30% down payment CHINAMFG confirmation of the Proforma Invoice (PI), and the balance is to be paid after inspection and before shipment. We accept both TT and L/C at sight.

Send message  Get product Offer & Brochure!!!


/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Local Teams
Warranty: 18 Months
Lubrication Style: Customized
Cooling System: Air Cooling/Water Cooling
Cylinder Arrangement: Balanced Opposed Arrangement
Cylinder Position: Customized
US$ 40000/Set
1 Set(Min.Order)

Request Sample



air compressor

Are There Specific Filtration Requirements for Oil-Free Compressors?

Yes, oil-free compressors have specific filtration requirements to ensure the quality and purity of the compressed air output. These filtration requirements are designed to address the unique characteristics of oil-free compressors and the potential contaminants that can be present in the intake air. Here’s a detailed explanation of the specific filtration requirements for oil-free compressors:

1. Pre-Filtration:

Pre-filtration is the first stage of filtration in oil-free compressors and is designed to remove larger particles, such as dust, dirt, and debris, from the intake air. These particles can enter the compressor and cause damage to internal components or affect the performance of downstream filtration stages. Pre-filters typically consist of pleated or mesh filters that capture particles of various sizes. The efficiency of pre-filters is usually specified in terms of their particle size removal capability, such as 5 microns or 10 microns.

2. Coalescing Filtration:

The coalescing filtration stage in oil-free compressors is responsible for removing smaller particles and coalescing water vapor into droplets for subsequent removal. This stage is crucial in ensuring that the compressed air remains free from fine particles and moisture, which can cause contamination and corrosion issues. Coalescing filters are designed with special media that capture and combine small particles and water droplets, allowing them to be easily separated from the compressed air. The efficiency of coalescing filters is typically specified in terms of their particulate removal capability and moisture removal efficiency, such as 0.01 microns and 99.9% respectively.

3. Activated Carbon Filtration:

Activated carbon filtration is often employed as a final stage in the filtration process of oil-free compressors. Activated carbon filters help eliminate odors and absorb any remaining oil vapors or hydrocarbons that might have bypassed the previous filtration stages. These filters contain activated carbon granules with a high surface area, allowing them to adsorb and trap odor-causing compounds and trace amounts of oil vapor. The efficiency of activated carbon filters is typically specified based on their odor removal capacity and oil vapor adsorption capacity.

It’s important to note that the specific filtration requirements for oil-free compressors may vary depending on the application and the desired air quality standards. Industries such as food and beverage, pharmaceuticals, electronics manufacturing, and painting often have more stringent filtration requirements to meet their specific air purity needs. In such cases, additional filtration stages, such as sterile filters or high-efficiency particulate air (HEPA) filters, may be incorporated to achieve the desired level of air quality.

Complying with industry standards and guidelines, such as ISO 8573, can provide guidance on the appropriate filtration requirements for oil-free compressors. These standards define specific limits for contaminants in compressed air, including oil content, particulate matter, and moisture, and can help determine the necessary filtration stages and their efficiency ratings.

By implementing the appropriate filtration requirements, oil-free compressors can ensure that the compressed air produced is clean, dry, and free from contaminants, meeting the specific air quality needs of various applications.

air compressor

Are There Any Specific Safety Considerations When Using Oil-Free Compressors?

Yes, there are specific safety considerations that should be taken into account when using oil-free compressors. Here’s a detailed explanation of the safety considerations associated with oil-free compressor operation:

1. Electrical Safety:

Oil-free compressors are powered by electricity, so electrical safety measures should be followed. It is important to ensure that the compressor is properly grounded and connected to a suitable power source. Electrical wiring and connections should be inspected regularly to identify any potential hazards such as frayed wires or loose connections. Adequate circuit protection, such as fuses or circuit breakers, should be in place to prevent overloads or short circuits. All electrical work should be performed by qualified personnel in compliance with applicable electrical codes and regulations.

2. Pressure Safety:

Compressed air generated by oil-free compressors can reach high pressures, and proper pressure safety measures should be in place. Pressure relief valves are essential components that protect the compressor and the entire compressed air system from overpressurization. These valves should be properly sized, regularly inspected, and tested to ensure they operate within the specified pressure limits. Pressure gauges should be installed to monitor and display the pressure levels accurately. It is important to avoid exceeding the maximum pressure rating of the compressor and to follow the manufacturer’s guidelines regarding pressure limitations.

3. System Ventilation:

Oil-free compressors generate heat during operation, and adequate ventilation is necessary to prevent overheating. Sufficient airflow around the compressor unit should be maintained to dissipate heat effectively. The compressor should be installed in a well-ventilated area, and any obstructions that could restrict airflow should be avoided. Inadequate ventilation can lead to increased operating temperatures, reduced compressor performance, and potential safety hazards. Manufacturers’ recommendations regarding ventilation requirements should be followed.

4. Preventing Injuries:

When working with oil-free compressors, certain precautions can help prevent injuries. It is important to wear appropriate personal protective equipment (PPE), such as safety glasses, hearing protection, and gloves, when operating or maintaining the compressor. Loose clothing, jewelry, or other items that could get caught in moving parts should be avoided. Compressed air should never be directed towards the body or other individuals, as it can cause serious injuries, such as cuts, bruises, or even pneumothorax. Proper training and clear instructions for safe operation should be provided to all personnel working with the compressor.

5. Maintenance and Inspection:

Regular maintenance and inspection of oil-free compressors are essential for safe operation. The compressor should be inspected for any signs of damage, leaks, or abnormal vibrations. Routine maintenance tasks, such as filter replacements, should be performed according to the manufacturer’s recommendations. Maintenance procedures should be carried out with the compressor turned off and isolated from the power source. Only authorized personnel with the necessary training and knowledge should perform maintenance tasks on the compressor to ensure proper safety protocols are followed.

6. Emergency Preparedness:

Being prepared for potential emergencies is crucial when using oil-free compressors. Emergency shutdown procedures should be established and clearly communicated to all personnel. Adequate fire suppression equipment, such as fire extinguishers, should be readily available and properly maintained. In the event of a compressor-related incident, personnel should be trained on emergency response protocols and evacuation procedures.

It is important to consult the manufacturer’s documentation and guidelines for specific safety considerations related to the oil-free compressor model being used. Additionally, adherence to relevant safety regulations and standards, as well as regular safety training and awareness programs, further contribute to maintaining a safe working environment when using oil-free compressors.

air compressor

How Does an Oil-Free Air Compressor Work?

An oil-free air compressor, also known as an oilless air compressor, operates using alternative methods to achieve compression without the need for lubricating oil. These compressors employ various techniques to deliver clean, oil-free compressed air. Here’s a detailed explanation of how an oil-free air compressor works:

1. Dry Compression:

In oil-free air compressors, the compression chamber is designed to operate without any oil present. The compression process starts with the intake stroke, where ambient air is drawn into the compressor through an inlet valve. The air is then compressed in the compression chamber without any oil lubrication.

2. Friction Reduction:

Since there is no oil in the compression chamber, special measures are taken to reduce friction and wear between the moving parts. These measures include the use of specialized materials, coatings, and surface treatments on the compressor components. These friction-reducing techniques minimize the need for lubrication and allow for efficient compression.

3. Piston Rings and Seals:

Oil-free compressors utilize advanced piston rings and seals to provide effective sealing without the need for oil lubrication. These rings and seals are designed to reduce internal leakage and ensure efficient compression. They help maintain the compression efficiency by minimizing air leakage during the compression process.

4. Cooling Mechanisms:

Oil-free air compressors often incorporate cooling mechanisms to dissipate the heat generated during compression. This helps prevent overheating and ensures the compressor operates within acceptable temperature limits. Common cooling methods include water cooling and air cooling. Water-cooled compressors use a water jacket or a separate cooling circuit to remove heat, while air-cooled compressors rely on fans and heat sinks to cool the compressor.

5. Filtration:

Oil-free compressors typically incorporate effective air filtration systems to remove contaminants, such as dust, particles, and moisture, from the intake air. These filtration systems ensure that the compressed air produced is clean and free from impurities. Depending on the application, additional filtration equipment, such as coalescing filters or activated carbon filters, may be employed to achieve specific air quality requirements.

6. Control and Safety Systems:

Oil-free air compressors are equipped with control and safety systems to monitor and regulate the compressor’s operation. These systems can include pressure switches, temperature sensors, safety valves, and control panels. They help maintain optimal operating conditions, protect the compressor from excessive pressures or temperatures, and provide safety features to prevent damage or accidents.

By employing these techniques and components, oil-free air compressors achieve compression without the need for lubricating oil. This results in clean, oil-free compressed air that is suitable for applications where oil contamination could be problematic, such as in industries like food processing, pharmaceuticals, electronics, and painting.

It’s important to note that the specific design and operation of oil-free air compressors may vary depending on the manufacturer and model. Therefore, it’s recommended to consult the manufacturer’s documentation and guidelines for detailed information on how a particular oil-free compressor works.

China Custom Unparalleled Efficiency Low Pressure Oil-Free Air-Cooled Oxygen Compressor   manufacturer China Custom Unparalleled Efficiency Low Pressure Oil-Free Air-Cooled Oxygen Compressor   manufacturer
editor by CX 2024-05-14

Recent Posts