China factory Silent Medical Dry Oil Free Replacement Air Compressor Oilless Class 0 Oil Free Screw Air Compressor portable air compressor

Product Description

Silent Medical Dry Oil Free Replacement  Air Compressor Oilless Class 0 Oil Free Screw Air Compressor

The ETC oil-free conversion technology opens up completely new possibilities for providing oil free compressed air in meeting with ISO 8573-1 Class 0 quality standard.

When it comes to holding down up-front operational costs, converter technology is ideally suited for the provision of entirely oil free compressed air. And it is dependable too: Penetration of oil into the compressed air network is absolutely impossible!

Operating costs are extremely low because no costly checkups are required. Commonly occurring risks such as oil penetration have been discarded, and frequent replacement of component elements as with filters has been completely eliminated.

Features of CHINAMFG ETC Series Oil Free Rotary Screw Air Compressor
1. Air quality to ISO8573-1 Class 0 standard with TUV certificate on request
2. Proven Eco-Tec Oil Free Converter technology from Germany and over thousands successful installation reference worldwide
3. Single stage airend design for easy and cost saving maintenance
4. T. E. F. C. IP55 class F electric motor in compliance with IEC/DIN standards
5. Modern concept suction valve with energy saving modulation control as option
6. Intelligent PLC control panel with sequential / remote control functions
7. Reliable automatic control box with “Siemens” contactors
8. High efficiency aftercooler (air- or water- cooled available)

Proper disposal is no problem either as a matter of fact, in terms of oil content the condensate is of drinking water quality! In the ETC converter the long hydrocarbon chains of the residual oil contained in the compressed air are broken up into harmless carbon dioxide and water, i.e. substances occurring naturally in the air. 

The catalytic converter incorporates a container with compact granulated pellets through which the compressed air circulates. This process breaks down and converts both oil droplets and oil vapors. The condensate that forms afterwards is therefore completely oil free and can be disposed of much less expensively and without the need for additional treatment. 

Oil/hydrogen concentration is below 0,0571 mg/m3. The addition of the catalytic converter guarantees class 1 compressed air (ISO 8573-1) for all applications where oil free compressed air is essential. 

ADEKOM (ASIA PACIFIC) LIMITED founded in the late 90’s is a specialized air/gas compressors and treatment system manufacturer with headquarter in Hong Kong. Its partners located in Vicenza, Italy and Germering, Germany are the world’s leading manufacturers with global recognition and experience in designing, manufacturing and marketing of rotary screw air/gas compressors for decades. QUALITY, RELIABILITY and ENERGY EFFICIENCY have been the main objectives of serving customers all over the world. CHINAMFG follows the company core of its European partners, is committed to the research & development, quality assurance and satisfaction of customers’ needs. Today, what CHINAMFG can do is not just to supply the best products to the market, but to provide THE TOTAL SOLUTION TO YOUR NEEDS!

CONTACT US

Asia Pacific Market: Spencer Lau (Ms.)

European/ Middle Eastern/ African Market: Echo Lok (Ms.)
 
American Market: Alice Kwok (Ms.)

After-sales Service: Yes
Warranty: 12 Months
Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Angular
Customization:
Available

|

air compressor

Can Oil-Free Air Compressors Handle High-Pressure Applications?

Yes, oil-free air compressors are capable of handling high-pressure applications, but certain considerations need to be taken into account. Here’s a detailed explanation of the capabilities and considerations regarding the use of oil-free air compressors in high-pressure applications:

1. Compressor Design:

Oil-free air compressors are designed to deliver oil-free compressed air, and some models are specifically engineered to handle high-pressure requirements. These compressors incorporate robust components, such as high-strength materials, reinforced valves, and advanced sealing technologies, to withstand the higher pressures generated during compression. They are typically designed to operate within specific pressure ranges, and their performance and reliability are optimized for those ranges.

2. Pressure Rating:

When selecting an oil-free air compressor for a high-pressure application, it is crucial to consider the compressor’s pressure rating. The pressure rating indicates the maximum pressure that the compressor can reliably generate and maintain. Oil-free compressors suitable for high-pressure applications are available with varying pressure ratings, ranging from several hundred PSI (pounds per square inch) to several thousand PSI, depending on the specific model and manufacturer. It’s important to choose a compressor with a pressure rating that meets or exceeds the requirements of the intended application.

3. Operating Efficiency:

Operating efficiency is an important consideration when using oil-free air compressors for high-pressure applications. As the pressure requirement increases, the compressor may consume more energy to achieve and maintain the desired pressure. It’s advisable to select a compressor that is optimized for energy efficiency, as it can help reduce operating costs and minimize environmental impact. Compressors equipped with advanced control systems, variable speed drives, and efficient motor designs can enhance overall energy efficiency in high-pressure applications.

4. Air Treatment and Filtration:

High-pressure applications often require dry and clean compressed air. In addition to the oil-free operation, it is important to ensure that the compressed air is adequately treated and filtered to remove moisture, particulates, and other contaminants. The use of appropriate air dryers, filters, and separators in the compressed air system is necessary to maintain the desired air quality and protect downstream equipment in high-pressure applications.

5. System Safety and Regulations:

High-pressure applications present additional safety considerations. It is essential to ensure that the entire compressed air system, including the compressor, storage tanks, piping, and safety devices, is designed, installed, and operated in compliance with relevant safety regulations and standards. Pressure relief valves, pressure gauges, and other safety devices should be appropriately sized and configured to handle the high-pressure conditions. Regular inspections, maintenance, and adherence to safety protocols are crucial to ensure the safe operation of the high-pressure oil-free air compressor system.

It’s important to consult with compressor manufacturers or industry experts to determine the suitability of specific oil-free compressors for high-pressure applications. They can provide guidance on selecting the right compressor model, assessing system requirements, and ensuring compliance with safety standards.

By considering the design, pressure rating, operating efficiency, air treatment, and system safety, oil-free air compressors can successfully handle high-pressure applications in various industries, including manufacturing, automotive, aerospace, and energy.

air compressor

Are There Any Specific Safety Considerations When Using Oil-Free Compressors?

Yes, there are specific safety considerations that should be taken into account when using oil-free compressors. Here’s a detailed explanation of the safety considerations associated with oil-free compressor operation:

1. Electrical Safety:

Oil-free compressors are powered by electricity, so electrical safety measures should be followed. It is important to ensure that the compressor is properly grounded and connected to a suitable power source. Electrical wiring and connections should be inspected regularly to identify any potential hazards such as frayed wires or loose connections. Adequate circuit protection, such as fuses or circuit breakers, should be in place to prevent overloads or short circuits. All electrical work should be performed by qualified personnel in compliance with applicable electrical codes and regulations.

2. Pressure Safety:

Compressed air generated by oil-free compressors can reach high pressures, and proper pressure safety measures should be in place. Pressure relief valves are essential components that protect the compressor and the entire compressed air system from overpressurization. These valves should be properly sized, regularly inspected, and tested to ensure they operate within the specified pressure limits. Pressure gauges should be installed to monitor and display the pressure levels accurately. It is important to avoid exceeding the maximum pressure rating of the compressor and to follow the manufacturer’s guidelines regarding pressure limitations.

3. System Ventilation:

Oil-free compressors generate heat during operation, and adequate ventilation is necessary to prevent overheating. Sufficient airflow around the compressor unit should be maintained to dissipate heat effectively. The compressor should be installed in a well-ventilated area, and any obstructions that could restrict airflow should be avoided. Inadequate ventilation can lead to increased operating temperatures, reduced compressor performance, and potential safety hazards. Manufacturers’ recommendations regarding ventilation requirements should be followed.

4. Preventing Injuries:

When working with oil-free compressors, certain precautions can help prevent injuries. It is important to wear appropriate personal protective equipment (PPE), such as safety glasses, hearing protection, and gloves, when operating or maintaining the compressor. Loose clothing, jewelry, or other items that could get caught in moving parts should be avoided. Compressed air should never be directed towards the body or other individuals, as it can cause serious injuries, such as cuts, bruises, or even pneumothorax. Proper training and clear instructions for safe operation should be provided to all personnel working with the compressor.

5. Maintenance and Inspection:

Regular maintenance and inspection of oil-free compressors are essential for safe operation. The compressor should be inspected for any signs of damage, leaks, or abnormal vibrations. Routine maintenance tasks, such as filter replacements, should be performed according to the manufacturer’s recommendations. Maintenance procedures should be carried out with the compressor turned off and isolated from the power source. Only authorized personnel with the necessary training and knowledge should perform maintenance tasks on the compressor to ensure proper safety protocols are followed.

6. Emergency Preparedness:

Being prepared for potential emergencies is crucial when using oil-free compressors. Emergency shutdown procedures should be established and clearly communicated to all personnel. Adequate fire suppression equipment, such as fire extinguishers, should be readily available and properly maintained. In the event of a compressor-related incident, personnel should be trained on emergency response protocols and evacuation procedures.

It is important to consult the manufacturer’s documentation and guidelines for specific safety considerations related to the oil-free compressor model being used. Additionally, adherence to relevant safety regulations and standards, as well as regular safety training and awareness programs, further contribute to maintaining a safe working environment when using oil-free compressors.

air compressor

Are Oil-Free Air Compressors Suitable for Food and Beverage Industries?

Yes, oil-free air compressors are highly suitable for the food and beverage industries and are widely used in various applications within these sectors. The clean and oil-free compressed air produced by these compressors is essential to maintain product quality, ensure food safety, and meet industry regulations. Here’s a detailed explanation of why oil-free air compressors are suitable for the food and beverage industries:

1. Preventing Contamination:

The primary advantage of oil-free air compressors in the food and beverage industries is the prevention of oil contamination. These industries have stringent hygiene and safety standards, and any contamination in the production process can compromise product quality and consumer health. Oil-free compressors eliminate the risk of oil particles entering the compressed air stream, ensuring that the compressed air used in various processes, such as packaging, filling, and bottling, is free from oil contamination.

2. Preserving Food Freshness:

Oil-free air compressors help maintain the freshness and quality of food products. In applications such as food packaging, where compressed air is used to create a protective atmosphere or seal packaging, the absence of oil eliminates the risk of oil residues affecting the taste, aroma, or shelf life of the packaged food. Oil-free compressors ensure that the compressed air used for these purposes is clean and does not introduce any unwanted flavors or odors.

3. Compliance with Food Safety Standards:

The food and beverage industries are subject to strict regulations and standards to ensure food safety. Oil-free air compressors help companies meet these requirements by providing clean, oil-free compressed air that adheres to food safety guidelines. Compressed air used in processes like air agitation, product drying, or pneumatic conveyance must be free from contaminants to prevent cross-contamination and maintain hygienic conditions throughout the production chain.

4. Minimizing Product Loss and Waste:

In the food and beverage industries, any product loss or waste can have significant financial and environmental implications. Oil contamination in compressed air can lead to product spoilage, resulting in costly product losses and waste. By using oil-free air compressors, the risk of product contamination is minimized, helping to reduce waste and improve overall production efficiency.

5. Ensuring Equipment Performance and Longevity:

Oil-free air compressors help protect sensitive food and beverage production equipment from oil-related issues. Oil contamination can damage pneumatic valves, seals, and other components, leading to equipment malfunction, unplanned downtime, and costly repairs. Oil-free compressors eliminate these risks, ensuring the longevity and reliable performance of the production equipment.

6. Meeting Industry-Specific Requirements:

The food and beverage industries have specific requirements for compressed air quality and purity. Oil-free air compressors are designed to meet these industry-specific requirements, often complying with standards such as ISO 8573-1 Class 0, which certifies the air as completely oil-free. This certification provides assurance that the compressed air meets the strictest quality standards and is suitable for critical applications in these industries.

By using oil-free air compressors, companies in the food and beverage industries can maintain the highest standards of product quality, hygiene, and safety. It is essential to select oil-free compressors specifically designed for these industries and follow proper maintenance protocols to ensure consistent performance and compliance with industry regulations.

China factory Silent Medical Dry Oil Free Replacement Air Compressor Oilless Class 0 Oil Free Screw Air Compressor   portable air compressorChina factory Silent Medical Dry Oil Free Replacement Air Compressor Oilless Class 0 Oil Free Screw Air Compressor   portable air compressor
editor by CX 2023-11-10

Recent Posts