China OEM 50L Factory Price Low Noise Electric Oil Free Oiless Direct Driven Piston Air Compressor portable air compressor

Product Description

Product Description
Features
1. Complete variety and series:
The 0.5 ~ 0.7MPA series designed by modern concepts to the rehabilitation air compressor is used to gather new technological achievements of micro -small air compressors domestic and abroad.

2. Technical agglomeration, comprehensive performance of machinery:

The optimized design of the air valve can effectively reduce exhaust resistance and exhaust temperature, and increase the exhaust volume. Design a reasonable aluminum cylinder head, high heat dissipation CHINAMFG to achieve rapid heat dissipation, effectively reduce exhaust temperature, and reduce energy consumption. Use intake dumplings or exhaust load unloading devices to effectively reduce energy consumption.
Oil strikes are used to strike oil to form splashing oil fog, lubricating bearing tiles and bearing, and reliable operation.
3.Close to the actual needs of users:The complete series of products, the exhaust volume has been from small to large, which meets the needs of air mechanical and gas such as air -drifting machines such as pneumatic rock drills. There are diverse structures, suitable for different users. Low -quality, low investment costs.

Product specifications series parameters

Model HV-4.0/5 HS-4.5/6 HS-4.5/6C

Item

Engine displacement m/min 4 4.5 4.5
Discharge pressure Mpa 0.5 0.6 0.6
Crankshaft speedr/min 970 980 980
Cylinders×cylinder diameter 
z×mm
4×120 4×120 4×120
Piston stroke mm 100 112 112
Volume of gas storage tank L 230 200 230
Supporting motivation L32diesel engine or
18.5kW,2pole motor
25kW,
6pole motor
QC490G
35kW
diesel engine
Pressure control mode Inlet Close
 
Inlet Close
 
Inlet Close
 
Lubricating mode splashing Oil pump forced pressure
And oil strike splash
Elastic sleeve pin coupling directly connected
Cooling mode Air cooling Air cooling Air cooling
Driving mode Clutch, triangular belt Elastic sleeve pin coupling directly connected Clutch, reducer Elastic sleeve pin coupling
Dimension(mm) 1900×1070×1260 1460×924×1210 2030×945×1560
Total weight(kg)
diesel engine
580 630
Total weight(kg)
eclectic engine
540 550

 

Model 2V-4.0/5C 2V-4.0/5P 2V-4.0/5

Item

Engine displacement m/min 4 4 4
Discharge pressure Mpa 0.5 0.5 0.5
Crankshaft speedr/min 980 980 980
Cylinders×cylinder diameter 
z×mm
4×125 4×125 4×125
Piston stroke mm 100 100 100
Volume of gas storage tank L 230 230 230
Supporting motivation QC490G
35kW
Four-cylinder diesel engine
HS400
27kW Single-cylinder diesel engine
22kW,
6pole motor
Pressure control mode Inlet Close
 
Inlet Close
 
Inlet Close
 
Lubricating mode splashing splashing splashing
Cooling mode Air cooling Air cooling Air cooling
Driving mode Clutch, reducer Elastic sleeve pin coupling Clutch, triangular belt Elastic sleeve pin coupling directly connected
Dimension(mm) 2120×895×1560 2100×945×1285 1900×930×1235
Total weight(kg)
diesel engine
680 492 680
Total weight(kg)
eclectic engine
    580

 

 

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
After-sales Service: Online
Lubrication Style: Oil-free
Cooling System: Air Cooling
Customization:
Available

|

air compressor

Are There Specific Filtration Requirements for Oil-Free Compressors?

Yes, oil-free compressors have specific filtration requirements to ensure the quality and purity of the compressed air output. These filtration requirements are designed to address the unique characteristics of oil-free compressors and the potential contaminants that can be present in the intake air. Here’s a detailed explanation of the specific filtration requirements for oil-free compressors:

1. Pre-Filtration:

Pre-filtration is the first stage of filtration in oil-free compressors and is designed to remove larger particles, such as dust, dirt, and debris, from the intake air. These particles can enter the compressor and cause damage to internal components or affect the performance of downstream filtration stages. Pre-filters typically consist of pleated or mesh filters that capture particles of various sizes. The efficiency of pre-filters is usually specified in terms of their particle size removal capability, such as 5 microns or 10 microns.

2. Coalescing Filtration:

The coalescing filtration stage in oil-free compressors is responsible for removing smaller particles and coalescing water vapor into droplets for subsequent removal. This stage is crucial in ensuring that the compressed air remains free from fine particles and moisture, which can cause contamination and corrosion issues. Coalescing filters are designed with special media that capture and combine small particles and water droplets, allowing them to be easily separated from the compressed air. The efficiency of coalescing filters is typically specified in terms of their particulate removal capability and moisture removal efficiency, such as 0.01 microns and 99.9% respectively.

3. Activated Carbon Filtration:

Activated carbon filtration is often employed as a final stage in the filtration process of oil-free compressors. Activated carbon filters help eliminate odors and absorb any remaining oil vapors or hydrocarbons that might have bypassed the previous filtration stages. These filters contain activated carbon granules with a high surface area, allowing them to adsorb and trap odor-causing compounds and trace amounts of oil vapor. The efficiency of activated carbon filters is typically specified based on their odor removal capacity and oil vapor adsorption capacity.

It’s important to note that the specific filtration requirements for oil-free compressors may vary depending on the application and the desired air quality standards. Industries such as food and beverage, pharmaceuticals, electronics manufacturing, and painting often have more stringent filtration requirements to meet their specific air purity needs. In such cases, additional filtration stages, such as sterile filters or high-efficiency particulate air (HEPA) filters, may be incorporated to achieve the desired level of air quality.

Complying with industry standards and guidelines, such as ISO 8573, can provide guidance on the appropriate filtration requirements for oil-free compressors. These standards define specific limits for contaminants in compressed air, including oil content, particulate matter, and moisture, and can help determine the necessary filtration stages and their efficiency ratings.

By implementing the appropriate filtration requirements, oil-free compressors can ensure that the compressed air produced is clean, dry, and free from contaminants, meeting the specific air quality needs of various applications.

air compressor

How Do You Troubleshoot Common Problems with Oil-Free Compressor Systems?

To troubleshoot common problems with oil-free compressor systems, follow these steps:

1. Check Power Supply:

Ensure that the compressor system is properly connected to a reliable power supply. Check for any tripped circuit breakers or blown fuses. Verify that the power switch is in the “on” position.

2. Inspect Air Filters:

Examine the air filters to see if they are dirty or clogged. Restricted airflow due to dirty filters can cause the compressor to overheat or operate inefficiently. Clean or replace the filters as necessary.

3. Check for Air Leaks:

Inspect the entire compressed air system for air leaks. Leaks can lead to reduced system pressure and inefficient operation. Use a leak detection solution or an ultrasonic leak detector to locate and repair any leaks in the system.

4. Monitor Pressure Gauges:

Observe the pressure gauges on the compressor system. If the pressure is consistently below the desired level, it could indicate a problem with the compressor’s output or a leak in the system. Ensure that the pressure relief valves are not open or malfunctioning.

5. Check for Excessive Heat:

Monitor the temperature of the compressor and associated components. If the system is running excessively hot, it may indicate a problem with cooling or lubrication. Ensure that the cooling fans are operating correctly and that the compressor is receiving proper lubrication, if applicable.

6. Inspect Drains and Condensate Management:

Check the drains and condensate management system for proper functioning. Accumulated condensate can cause issues such as water contamination or pressure drops. Ensure that drains are clear and functioning, and that the condensate management system is operating as intended.

7. Review Maintenance Records:

Refer to the maintenance records of the compressor system. Ensure that routine maintenance tasks, such as filter replacements, oil changes (if applicable), and component inspections, have been performed according to the manufacturer’s recommendations. Lack of proper maintenance can contribute to various issues in compressor systems.

8. Consult Manufacturer’s Documentation:

Refer to the manufacturer’s documentation, such as the user manual or troubleshooting guide, for specific guidance on diagnosing and resolving common problems with the oil-free compressor system. Manufacturers often provide detailed troubleshooting steps and recommendations tailored to their specific equipment.

9. Seek Professional Assistance:

If the troubleshooting steps do not resolve the issue or if you are uncertain about performing any maintenance or repairs, it is advisable to seek professional assistance. Contact the manufacturer’s customer support or consult a qualified technician with expertise in oil-free compressor systems.

Remember to prioritize safety when troubleshooting compressor systems. Follow proper lockout/tagout procedures and adhere to all safety guidelines provided by the manufacturer.air compressor

What Is an Oil-Free Air Compressor?

An oil-free air compressor, also known as an oilless air compressor, is a type of air compressor that operates without the use of lubricating oil in the compression chamber. Unlike traditional air compressors that rely on oil for lubrication and sealing, oil-free compressors employ alternative methods to achieve compression and deliver clean, oil-free compressed air. Here’s a detailed explanation of how oil-free air compressors work and their key characteristics:

Working Principle:

Oil-free air compressors utilize various techniques to compress air without the need for oil. The most common methods include:

  • Dry Compression: In this method, the compression chamber doesn’t have any oil present. Special materials, coatings, and surface treatments are used to reduce friction and wear between the moving parts, allowing for efficient compression without oil lubrication.
  • Water or Air Cooling: Oil-free compressors often employ advanced cooling mechanisms, such as water or air cooling, to dissipate the heat generated during compression. This helps to maintain the operating temperature within acceptable limits and ensures the longevity of the compressor.
  • Piston Rings and Seals: Instead of relying on oil for lubrication and sealing, oil-free compressors use specialized piston rings, seals, or other forms of dry frictionless technology. These components provide the necessary sealing and reduce internal friction, allowing for efficient compression without the need for oil.

Characteristics of Oil-Free Air Compressors:

1. Clean and Oil-Free Air: The primary advantage of oil-free air compressors is that they deliver air that is free from oil contamination. This makes them suitable for applications where oil contamination can be detrimental, such as in the medical, pharmaceutical, food and beverage, electronics, and automotive industries.

2. Low Maintenance: Oil-free compressors typically require less maintenance compared to oil-lubricated compressors. Since there is no oil to change or monitor, maintenance tasks related to oil filtration, oil changes, and oil disposal are eliminated. This can result in cost savings and reduced downtime.

3. Compact and Lightweight: Oil-free compressors are often designed to be compact and lightweight, making them portable and easy to transport. This makes them suitable for applications where mobility is required, such as construction sites, workshops, and on-site maintenance tasks.

4. No Oil Contamination Risk: With oil-free compressors, there is no risk of oil contaminating the compressed air system. This eliminates the need for additional filtration or separation equipment to remove oil from the compressed air, simplifying the overall system design.

5. Lower Initial Cost: In general, oil-free compressors tend to have a lower initial cost compared to oil-lubricated compressors. This can be advantageous for applications with budget constraints or when the specific requirements of the application align with the capabilities of oil-free compressors.

It’s important to note that oil-free air compressors may have certain limitations compared to oil-lubricated compressors. They may have lower maximum operating pressures and higher operating temperatures. Additionally, the absence of oil lubrication may result in slightly reduced efficiency and increased wear on certain components over time.

By understanding the working principle and characteristics of oil-free air compressors, users can determine whether this type of compressor is suitable for their specific application and requirements.

China OEM 50L Factory Price Low Noise Electric Oil Free Oiless Direct Driven Piston Air Compressor   portable air compressorChina OEM 50L Factory Price Low Noise Electric Oil Free Oiless Direct Driven Piston Air Compressor   portable air compressor
editor by CX 2023-10-08

Recent Posts