China Standard 50L Factory Price Low Noise Electric Oil Free Oiless Direct Driven Piston Air Compressor manufacturer

Product Description

Product Description
Features
1. Complete variety and series:
The 0.5 ~ 0.7MPA series designed by modern concepts to the rehabilitation air compressor is used to gather new technological achievements of micro -small air compressors domestic and abroad.

2. Technical agglomeration, comprehensive performance of machinery:

The optimized design of the air valve can effectively reduce exhaust resistance and exhaust temperature, and increase the exhaust volume. Design a reasonable aluminum cylinder head, high heat dissipation CHINAMFG to achieve rapid heat dissipation, effectively reduce exhaust temperature, and reduce energy consumption. Use intake dumplings or exhaust load unloading devices to effectively reduce energy consumption.
Oil strikes are used to strike oil to form splashing oil fog, lubricating bearing tiles and bearing, and reliable operation.
3.Close to the actual needs of users:The complete series of products, the exhaust volume has been from small to large, which meets the needs of air mechanical and gas such as air -drifting machines such as pneumatic rock drills. There are diverse structures, suitable for different users. Low -quality, low investment costs.

Product specifications series parameters

Model HV-4.0/5 HS-4.5/6 HS-4.5/6C

Item

Engine displacement m/min 4 4.5 4.5
Discharge pressure Mpa 0.5 0.6 0.6
Crankshaft speedr/min 970 980 980
Cylinders×cylinder diameter 
z×mm
4×120 4×120 4×120
Piston stroke mm 100 112 112
Volume of gas storage tank L 230 200 230
Supporting motivation L32diesel engine or
18.5kW,2pole motor
25kW,
6pole motor
QC490G
35kW
diesel engine
Pressure control mode Inlet Close
 
Inlet Close
 
Inlet Close
 
Lubricating mode splashing Oil pump forced pressure
And oil strike splash
Elastic sleeve pin coupling directly connected
Cooling mode Air cooling Air cooling Air cooling
Driving mode Clutch, triangular belt Elastic sleeve pin coupling directly connected Clutch, reducer Elastic sleeve pin coupling
Dimension(mm) 1900×1070×1260 1460×924×1210 2030×945×1560
Total weight(kg)
diesel engine
580 630
Total weight(kg)
eclectic engine
540 550

 

Model 2V-4.0/5C 2V-4.0/5P 2V-4.0/5

Item

Engine displacement m/min 4 4 4
Discharge pressure Mpa 0.5 0.5 0.5
Crankshaft speedr/min 980 980 980
Cylinders×cylinder diameter 
z×mm
4×125 4×125 4×125
Piston stroke mm 100 100 100
Volume of gas storage tank L 230 230 230
Supporting motivation QC490G
35kW
Four-cylinder diesel engine
HS400
27kW Single-cylinder diesel engine
22kW,
6pole motor
Pressure control mode Inlet Close
 
Inlet Close
 
Inlet Close
 
Lubricating mode splashing splashing splashing
Cooling mode Air cooling Air cooling Air cooling
Driving mode Clutch, reducer Elastic sleeve pin coupling Clutch, triangular belt Elastic sleeve pin coupling directly connected
Dimension(mm) 2120×895×1560 2100×945×1285 1900×930×1235
Total weight(kg)
diesel engine
680 492 680
Total weight(kg)
eclectic engine
    580

 

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online
Lubrication Style: Oil-free
Cooling System: Air Cooling
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

Are There Specific Filtration Requirements for Oil-Free Compressors?

Yes, oil-free compressors have specific filtration requirements to ensure the quality and purity of the compressed air output. These filtration requirements are designed to address the unique characteristics of oil-free compressors and the potential contaminants that can be present in the intake air. Here’s a detailed explanation of the specific filtration requirements for oil-free compressors:

1. Pre-Filtration:

Pre-filtration is the first stage of filtration in oil-free compressors and is designed to remove larger particles, such as dust, dirt, and debris, from the intake air. These particles can enter the compressor and cause damage to internal components or affect the performance of downstream filtration stages. Pre-filters typically consist of pleated or mesh filters that capture particles of various sizes. The efficiency of pre-filters is usually specified in terms of their particle size removal capability, such as 5 microns or 10 microns.

2. Coalescing Filtration:

The coalescing filtration stage in oil-free compressors is responsible for removing smaller particles and coalescing water vapor into droplets for subsequent removal. This stage is crucial in ensuring that the compressed air remains free from fine particles and moisture, which can cause contamination and corrosion issues. Coalescing filters are designed with special media that capture and combine small particles and water droplets, allowing them to be easily separated from the compressed air. The efficiency of coalescing filters is typically specified in terms of their particulate removal capability and moisture removal efficiency, such as 0.01 microns and 99.9% respectively.

3. Activated Carbon Filtration:

Activated carbon filtration is often employed as a final stage in the filtration process of oil-free compressors. Activated carbon filters help eliminate odors and absorb any remaining oil vapors or hydrocarbons that might have bypassed the previous filtration stages. These filters contain activated carbon granules with a high surface area, allowing them to adsorb and trap odor-causing compounds and trace amounts of oil vapor. The efficiency of activated carbon filters is typically specified based on their odor removal capacity and oil vapor adsorption capacity.

It’s important to note that the specific filtration requirements for oil-free compressors may vary depending on the application and the desired air quality standards. Industries such as food and beverage, pharmaceuticals, electronics manufacturing, and painting often have more stringent filtration requirements to meet their specific air purity needs. In such cases, additional filtration stages, such as sterile filters or high-efficiency particulate air (HEPA) filters, may be incorporated to achieve the desired level of air quality.

Complying with industry standards and guidelines, such as ISO 8573, can provide guidance on the appropriate filtration requirements for oil-free compressors. These standards define specific limits for contaminants in compressed air, including oil content, particulate matter, and moisture, and can help determine the necessary filtration stages and their efficiency ratings.

By implementing the appropriate filtration requirements, oil-free compressors can ensure that the compressed air produced is clean, dry, and free from contaminants, meeting the specific air quality needs of various applications.

air compressor

How Do You Troubleshoot Common Problems with Oil-Free Compressor Systems?

To troubleshoot common problems with oil-free compressor systems, follow these steps:

1. Check Power Supply:

Ensure that the compressor system is properly connected to a reliable power supply. Check for any tripped circuit breakers or blown fuses. Verify that the power switch is in the “on” position.

2. Inspect Air Filters:

Examine the air filters to see if they are dirty or clogged. Restricted airflow due to dirty filters can cause the compressor to overheat or operate inefficiently. Clean or replace the filters as necessary.

3. Check for Air Leaks:

Inspect the entire compressed air system for air leaks. Leaks can lead to reduced system pressure and inefficient operation. Use a leak detection solution or an ultrasonic leak detector to locate and repair any leaks in the system.

4. Monitor Pressure Gauges:

Observe the pressure gauges on the compressor system. If the pressure is consistently below the desired level, it could indicate a problem with the compressor’s output or a leak in the system. Ensure that the pressure relief valves are not open or malfunctioning.

5. Check for Excessive Heat:

Monitor the temperature of the compressor and associated components. If the system is running excessively hot, it may indicate a problem with cooling or lubrication. Ensure that the cooling fans are operating correctly and that the compressor is receiving proper lubrication, if applicable.

6. Inspect Drains and Condensate Management:

Check the drains and condensate management system for proper functioning. Accumulated condensate can cause issues such as water contamination or pressure drops. Ensure that drains are clear and functioning, and that the condensate management system is operating as intended.

7. Review Maintenance Records:

Refer to the maintenance records of the compressor system. Ensure that routine maintenance tasks, such as filter replacements, oil changes (if applicable), and component inspections, have been performed according to the manufacturer’s recommendations. Lack of proper maintenance can contribute to various issues in compressor systems.

8. Consult Manufacturer’s Documentation:

Refer to the manufacturer’s documentation, such as the user manual or troubleshooting guide, for specific guidance on diagnosing and resolving common problems with the oil-free compressor system. Manufacturers often provide detailed troubleshooting steps and recommendations tailored to their specific equipment.

9. Seek Professional Assistance:

If the troubleshooting steps do not resolve the issue or if you are uncertain about performing any maintenance or repairs, it is advisable to seek professional assistance. Contact the manufacturer’s customer support or consult a qualified technician with expertise in oil-free compressor systems.

Remember to prioritize safety when troubleshooting compressor systems. Follow proper lockout/tagout procedures and adhere to all safety guidelines provided by the manufacturer.air compressor

Can Oil-Free Compressors Be Used in Medical Applications?

Yes, oil-free compressors can be used in medical applications and are widely utilized in various healthcare settings. These compressors provide clean, oil-free compressed air, making them suitable for critical medical processes and equipment. Here’s a detailed explanation of the use of oil-free compressors in medical applications:

1. Surgical Tools and Instrumentation:

Oil-free air compressors are commonly used in surgical suites and operating rooms to power pneumatic surgical tools and instrumentation. Surgical tools, such as pneumatic drills, saws, and shavers, rely on compressed air for their operation. Using oil-free compressors ensures that the compressed air delivered to these tools is free from oil contamination, reducing the risk of oil particles entering the surgical site or interfering with the sterile environment.

2. Respiratory Devices:

In respiratory care, oil-free compressors play a vital role in powering various medical devices, such as ventilators, nebulizers, and continuous positive airway pressure (CPAP) machines. These devices require a clean and reliable source of compressed air to deliver oxygen or medication to patients. Oil-free compressors ensure that the compressed air produced is free from oil, providing safe and effective respiratory support.

3. Dental Equipment:

Oil-free compressors are extensively used in dental offices and clinics to power dental tools and equipment, including dental drills, air syringes, and suction devices. Dental procedures require a high level of precision, and any contamination in the compressed air can compromise patient safety and treatment outcomes. By using oil-free compressors, dental professionals can ensure the delivery of clean, oil-free compressed air for optimal dental care.

4. Laboratory Applications:

Oil-free compressors are employed in various laboratory applications within the medical field. These applications include air supply for analytical instruments, sample preparation, cell culture, and other research processes. Oil-free compressed air is essential in maintaining the integrity of samples, preventing contamination, and ensuring accurate and reliable test results.

5. Pharmaceutical Manufacturing:

In pharmaceutical manufacturing, oil-free compressors are utilized to provide clean compressed air for critical processes. This includes applications such as product drying, powder handling, and packaging. Oil-free compressed air ensures the purity and quality of pharmaceutical products, meeting stringent regulatory requirements and minimizing the risk of contamination.

6. Medical Gas Systems:

Oil-free compressors are an integral part of medical gas systems, which provide essential gases like oxygen, nitrogen, and compressed air throughout healthcare facilities. These gases are used for various medical purposes, such as patient breathing, anesthesia, laboratory testing, and respiratory therapy. Oil-free compressors ensure the delivery of clean and uncontaminated medical gases, maintaining patient safety and the reliability of medical gas systems.

Oil-free compressors offer the necessary features and performance required for critical medical applications. They provide clean, oil-free compressed air, ensuring patient safety, maintaining sterility, and meeting regulatory standards. However, it’s important to select oil-free compressors specifically designed and certified for medical applications and adhere to manufacturer guidelines and maintenance protocols to ensure optimal performance and patient care.

China Standard 50L Factory Price Low Noise Electric Oil Free Oiless Direct Driven Piston Air Compressor   manufacturer China Standard 50L Factory Price Low Noise Electric Oil Free Oiless Direct Driven Piston Air Compressor   manufacturer
editor by CX 2024-04-16

Recent Posts