China supplier Silent Oil Free Less Oilless Direct Reciprocating Piston Portable Air Compressor best air compressor

Product Description

Silent Oil Free Less Oilless Direct Electric High Pressure Reciprocating Piston Portable Air Compressor
 

Features: 

* Ultra Quiet  –  Only 58  decibels
* Oil-Free Pump – Cleaner air for better tool operation.
                           Less maintenance and Costs.
* Two pressure control gauges 
* One  universal 1/4″ quick connector
* Produces less heat which dissipates more efficiently
* Thermal Overload Protector
* 120 PSI  Maximum Pressure 
* 110v / 60 hz
* Low Amp Draw – 4.6 Amps 
* Tank fill rate from empty to full – 70 Seconds 
* Recovery time from 90 CHINAMFG to 120 CHINAMFG – 25 Seconds
* Aluminum Air Tank  – Rust-Free for long life and lightweight
  Only 34 pounds
* L (18.7″) x W/D (14..2″) x H (14.75″)
* Comes complete with Air Filter
* 1 year Limited Warranty

 

3/4  HP (Rated/Running) – 1.5 HP (Peak)
2.0  Gallon Aluminum (Rust-Free) Tank
2.40 CFM @ 40 PSI     
1.50 CFM @ 90 PSI 

 
The  Ultra Quiet & Oil-Free Air Compressor is designed to be 1 of the quietest air compressors in the industry having only 58 decibels of sound.    
 
The powerful 3/4 HP motor operates at only 1680 RPM creating less noise and less wear.
 
The Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous runtimes.
 
The Oil-Free Dual Piston Pump System is engineered for high performance and durability.
 
The  Air Compressor has a Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 Plus hours compared to other comparable air compressors with life cycles of 500 hours or less. 
 
The Oil-Free Pump allows for use in a variety of different temperatures and uneven terrains.
 
The 2.0 Gallon Aluminum Air Tank is Lightweight (34 lbs) and Rust Resistant making  it very easy to transport.
 
This air compressor is ideal for anyone working inside where noise is a major issue.

Application Use:
Air Brushing,Blow Cleaning,Bolting/Wrenching,Brad Nailing/Stapling,Cutting,Drilling,Finish Nailing,Framing Nailing,
Hobby Nailing,Hobby Painting,Inflation,Roof Nailing,Sanding,Spraying,Surface Prep

 

Output at 40 psi   2.40 cfm
Output at 90 psi   1.50 cfm
Maximum Pressure   120 psi
Kick On / Kick Off   90 CHINAMFG / 120 psi
Time To Fill Tank (from empty)   70 senconds
Motor   3/4 Hp piston Electric (4.6 Amps)
Motor Speed   1,680 rpm
Voltage / Hertz   110 V / 60 Hz
Pump Type   Oil Free, Dual Piston
Decibel Level   58 dB
Tank Capacity   2 gallons
Weight   34 pounds
Dimensions   18.7″ (L) x 14.2″ (W) x 14.75″ (H)
Manufacturer Limited Warranty   1Year

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style: Oil-free
Cooling System: Air Cooling
Cylinder Arrangement: Parallel Arrangement
Cylinder Position: Horizontal
Structure Type: Closed Type
Compress Level: Single-Stage
Customization:
Available

|

air compressor

Can Oil-Free Air Compressors Be Used for Breathing Air Applications?

Yes, oil-free air compressors can be used for breathing air applications, but it is crucial to ensure that the compressor and the associated equipment meet the required standards and regulations for breathing air quality and safety. Here’s a detailed explanation of using oil-free air compressors for breathing air applications:

1. Compressor Design and Certification:

When considering the use of oil-free air compressors for breathing air applications, it is essential to select compressors that are specifically designed and certified for such purposes. Dedicated oil-free compressors designed for breathing air applications typically incorporate additional features and safeguards to ensure the production of clean and safe compressed air. These compressors undergo rigorous testing and certification processes to meet the stringent standards and regulations for breathing air quality.

2. Air Treatment and Filtration:

In breathing air applications, the compressed air must undergo thorough treatment and filtration to remove contaminants and ensure its safety for breathing. Oil-free compressors are typically equipped with advanced filtration systems, including pre-filters, coalescing filters, activated carbon filters, and sometimes additional stages such as sterile filters or high-efficiency particulate air (HEPA) filters. These filtration stages work together to eliminate particulates, moisture, odors, oil vapors, and other potential contaminants from the compressed air, ensuring its suitability for breathing air applications.

3. Compliance with Breathing Air Standards:

Oil-free compressors used for breathing air applications must comply with specific standards and regulations that define the acceptable limits for contaminants in breathing air. International standards such as ISO 8573 and national regulations, such as the Occupational Safety and Health Administration (OSHA) standards in the United States, set guidelines for breathing air quality and specify the maximum allowable levels of contaminants, including oil content, particulate matter, and moisture. Compressors used for breathing air applications should meet or exceed these standards to ensure the safety and health of individuals who rely on the compressed air for breathing.

4. Regular Maintenance and Monitoring:

To ensure the ongoing safety and quality of the breathing air produced by oil-free compressors, regular maintenance and monitoring are essential. This includes routine inspections, filter replacements, and adherence to recommended maintenance schedules. Regular monitoring of air quality parameters, such as oil content, oxygen levels, and microbiological contamination, can help identify any potential issues and ensure that the compressor continues to produce clean and safe breathing air.

It’s important to note that not all oil-free compressors are suitable for breathing air applications. It is necessary to select compressors specifically designed and certified for this purpose, ensuring they meet the required standards and regulations. Additionally, the entire breathing air system, including air storage cylinders, distribution lines, and breathing apparatus, must also meet the necessary safety standards and undergo regular inspections and maintenance.

By following these guidelines and using appropriately designed and certified oil-free compressors, it is possible to generate clean and safe breathing air for various applications, such as medical facilities, diving operations, firefighting, and respiratory protection in industrial settings.

air compressor

Are There Any Specific Safety Considerations When Using Oil-Free Compressors?

Yes, there are specific safety considerations that should be taken into account when using oil-free compressors. Here’s a detailed explanation of the safety considerations associated with oil-free compressor operation:

1. Electrical Safety:

Oil-free compressors are powered by electricity, so electrical safety measures should be followed. It is important to ensure that the compressor is properly grounded and connected to a suitable power source. Electrical wiring and connections should be inspected regularly to identify any potential hazards such as frayed wires or loose connections. Adequate circuit protection, such as fuses or circuit breakers, should be in place to prevent overloads or short circuits. All electrical work should be performed by qualified personnel in compliance with applicable electrical codes and regulations.

2. Pressure Safety:

Compressed air generated by oil-free compressors can reach high pressures, and proper pressure safety measures should be in place. Pressure relief valves are essential components that protect the compressor and the entire compressed air system from overpressurization. These valves should be properly sized, regularly inspected, and tested to ensure they operate within the specified pressure limits. Pressure gauges should be installed to monitor and display the pressure levels accurately. It is important to avoid exceeding the maximum pressure rating of the compressor and to follow the manufacturer’s guidelines regarding pressure limitations.

3. System Ventilation:

Oil-free compressors generate heat during operation, and adequate ventilation is necessary to prevent overheating. Sufficient airflow around the compressor unit should be maintained to dissipate heat effectively. The compressor should be installed in a well-ventilated area, and any obstructions that could restrict airflow should be avoided. Inadequate ventilation can lead to increased operating temperatures, reduced compressor performance, and potential safety hazards. Manufacturers’ recommendations regarding ventilation requirements should be followed.

4. Preventing Injuries:

When working with oil-free compressors, certain precautions can help prevent injuries. It is important to wear appropriate personal protective equipment (PPE), such as safety glasses, hearing protection, and gloves, when operating or maintaining the compressor. Loose clothing, jewelry, or other items that could get caught in moving parts should be avoided. Compressed air should never be directed towards the body or other individuals, as it can cause serious injuries, such as cuts, bruises, or even pneumothorax. Proper training and clear instructions for safe operation should be provided to all personnel working with the compressor.

5. Maintenance and Inspection:

Regular maintenance and inspection of oil-free compressors are essential for safe operation. The compressor should be inspected for any signs of damage, leaks, or abnormal vibrations. Routine maintenance tasks, such as filter replacements, should be performed according to the manufacturer’s recommendations. Maintenance procedures should be carried out with the compressor turned off and isolated from the power source. Only authorized personnel with the necessary training and knowledge should perform maintenance tasks on the compressor to ensure proper safety protocols are followed.

6. Emergency Preparedness:

Being prepared for potential emergencies is crucial when using oil-free compressors. Emergency shutdown procedures should be established and clearly communicated to all personnel. Adequate fire suppression equipment, such as fire extinguishers, should be readily available and properly maintained. In the event of a compressor-related incident, personnel should be trained on emergency response protocols and evacuation procedures.

It is important to consult the manufacturer’s documentation and guidelines for specific safety considerations related to the oil-free compressor model being used. Additionally, adherence to relevant safety regulations and standards, as well as regular safety training and awareness programs, further contribute to maintaining a safe working environment when using oil-free compressors.

air compressor

Can Oil-Free Compressors Be Used in Medical Applications?

Yes, oil-free compressors can be used in medical applications and are widely utilized in various healthcare settings. These compressors provide clean, oil-free compressed air, making them suitable for critical medical processes and equipment. Here’s a detailed explanation of the use of oil-free compressors in medical applications:

1. Surgical Tools and Instrumentation:

Oil-free air compressors are commonly used in surgical suites and operating rooms to power pneumatic surgical tools and instrumentation. Surgical tools, such as pneumatic drills, saws, and shavers, rely on compressed air for their operation. Using oil-free compressors ensures that the compressed air delivered to these tools is free from oil contamination, reducing the risk of oil particles entering the surgical site or interfering with the sterile environment.

2. Respiratory Devices:

In respiratory care, oil-free compressors play a vital role in powering various medical devices, such as ventilators, nebulizers, and continuous positive airway pressure (CPAP) machines. These devices require a clean and reliable source of compressed air to deliver oxygen or medication to patients. Oil-free compressors ensure that the compressed air produced is free from oil, providing safe and effective respiratory support.

3. Dental Equipment:

Oil-free compressors are extensively used in dental offices and clinics to power dental tools and equipment, including dental drills, air syringes, and suction devices. Dental procedures require a high level of precision, and any contamination in the compressed air can compromise patient safety and treatment outcomes. By using oil-free compressors, dental professionals can ensure the delivery of clean, oil-free compressed air for optimal dental care.

4. Laboratory Applications:

Oil-free compressors are employed in various laboratory applications within the medical field. These applications include air supply for analytical instruments, sample preparation, cell culture, and other research processes. Oil-free compressed air is essential in maintaining the integrity of samples, preventing contamination, and ensuring accurate and reliable test results.

5. Pharmaceutical Manufacturing:

In pharmaceutical manufacturing, oil-free compressors are utilized to provide clean compressed air for critical processes. This includes applications such as product drying, powder handling, and packaging. Oil-free compressed air ensures the purity and quality of pharmaceutical products, meeting stringent regulatory requirements and minimizing the risk of contamination.

6. Medical Gas Systems:

Oil-free compressors are an integral part of medical gas systems, which provide essential gases like oxygen, nitrogen, and compressed air throughout healthcare facilities. These gases are used for various medical purposes, such as patient breathing, anesthesia, laboratory testing, and respiratory therapy. Oil-free compressors ensure the delivery of clean and uncontaminated medical gases, maintaining patient safety and the reliability of medical gas systems.

Oil-free compressors offer the necessary features and performance required for critical medical applications. They provide clean, oil-free compressed air, ensuring patient safety, maintaining sterility, and meeting regulatory standards. However, it’s important to select oil-free compressors specifically designed and certified for medical applications and adhere to manufacturer guidelines and maintenance protocols to ensure optimal performance and patient care.

China supplier Silent Oil Free Less Oilless Direct Reciprocating Piston Portable Air Compressor   best air compressorChina supplier Silent Oil Free Less Oilless Direct Reciprocating Piston Portable Air Compressor   best air compressor
editor by CX 2024-02-14

Recent Posts